i-Scan UHF – 865-928 MHz Reader and Accessories
The i-Scan UHF readers from FEIG ELECTRONIC are for reading UHF (Ultra High Frequency) transponders that are EPC Gen2 and ISO18000-6 compliant*. FEIG ELECTRONIC have also developed special firmware for a number of other protocols which are available on request.
The i-Scan UHF range covers OEM proximity modules (0-1m) such as the ID.ISC.MU02 and the ID.ISC.PRHD102 hand held unit.
For midrange reading (1-2.5m) FEIG ELECTRONIC have the ID.ISC.MRU102 readers, these readers all support a wide range of external antenna and have various data outputs. The ID.ISC.MRU102 is a housed reader with either USB or ethernet outputs. They have a single antenna output and one internal antenna. Power is configurable up to 500mW. The ID.ISC.MRU102-A is a PCB level reader with serial and USB connectivity, the unit has three antenna outputs and a single internal antenna.
The long range UHF readers offered by FEIG ELECTRONIC are the ID.ISC.LRU1002 and ID.ISC.LRU300 and ID.ISC.LRU3500. With 4 antenna ports and various data outputs these reader have the ability to read EPC Gen2 transponders at over 12m.
FEIG ELECTRONIC not only offer a wide range of UHF readers but also a wide range of antenna and multiplexers enabling one reader to drive many antenna.
With anti-collision technology available in all i-Scan UHF readers it is possible to read up to over 300 transponders per second simultaneously. ***
i-Scan UHF readers are used in a number of applications such as, car parking, access control, library book management, logistics, supply chain and asset management, document tracking and tracking medical samples.
*(if you are in any doubt please check the relevant data sheet or ask for advice).
** (transponder and antenna dependant)
*** (reader, transponder and antenna dependant)
ID ISC.MU02.02 -

ID ISC.PRHD102-USB-B -

868 MHz proximity read and write module.
-
Dimensions: 50x50x14mm (LxWxH).
-
Two external antenna ports.
-
Interfaces: RS232-V24, data/clock (-AD version) RS232-LVTTL, USB (-CU version).
-
Power supply: 5V DC.
-
Power output 10 mW – 170 mW configurable.
-
Supported transponders: ISO18000-6 EPC Class 1 Gen 2
-
The MU02 reader will provide read ranges of up to 0.5m with the part ID ISC ANT75/50 and up to 2.0m with the part ID ISC.ANT170/170.
Examples of use: Access control, payment systems, automation Systems
Hand held unit with combined HF and UHF readers.
-
Dimensions: 230x100x80mm (LxWxH).
-
Interfaces: USB (-USB version) Bluetooth (-B version).
-
Power supply – 5V DC via USB or 4xAA batteries for Bluetooth version.
-
Power output HF – 200 mW, UHF 10 mW to 100 mW (configurable).
-
Supported transponders – ISO15693, EPC Class 1 Gen2, and ISO18000-6.
Examples of use: Automation systems, retail and library.
ID ISC.MRU102 – ID ISC.MRMU102 -


UHF Mid-range reader.
-
Available as housed or PCB level modules.
-
Dimensions: Housed version -145x85x27mm (LxWxH).
Module version – 137x77x17mm .
-
Interfaces: Housed reader USB (-USB version) or Ethernet (-PoE version).
Module version is RS232 and USB.
-
Power supply – 12-24V DC or 48V via PoE.
-
Power output 100-500 mW (configurable).
-
Supported transponders – EPC Class 1 Gen2, and ISO18000-6.
-
All reader support three external antenna and one internal antenna
Examples of use: Automation systems, production lines, retail and logistics.
-
Special version available – MRU102-PoE-LED – includes additional 3 LED’s and single internal antenna for desktop applications.
ID ISC.LRU1002 – LRU3000 – LRU3500 -

UHF long range readers.
-
IP53 rated aluminium enclosure (upgradable to IP64 with sealing cap) Dimensions: 260x157x65mm.
-
Internal mux and 4 antenna output.
-
Interfaces: RS232, Wiegand, USB and Ethernet outputs (LRU3500 also has USB port for WLAN dongle).
-
4 modes of operation, Host, scan, buffered read and notification mode.
-
Power Supply 24V DC, LRU3500 has PoE capability.
-
Power output LRU1002/LRU3000 - 2 W, LRU3000 - 4 W (max 1 W using PoE). Read ranges 8-16m.
-
Supported transponders – EPC Class 1 Gen2, and ISO18000-6.
Examples of use: Automation systems, production lines, retail and logistics.
ID ISC.UMUX -

ID ISC ANT.U170/170 – ANT.U270/270 – ANT.U600/270 -

UHF 8 way multiplexer.
-
Configurable to run in up to 3 cascading levels and therefore it is theoretically possible to have 512 antenna from an MRU102 and 2048 antenna from an LRU1002/3000/3500 reader.
-
Dimensions: 85x145x27mm.
-
Power supply 12-24V DC
Examples of use: Automation systems, production lines, retail and logistics. Multi antenna array for smart shelves and portals. (Application notes are available).
FEIG UHF antenna are available in 3 std sizes -
-
170x170x26.5mm
-
270x270x57mm
-
600x270x57mm.
-
IP65 rated
-
SMA connectors for antenna cable (Std lengths are 2m and 6m).
-
All antenna are circular polarised.
-
Antenna gain and beam width/angle vary.
-
Mounting sets are also available – ID ISC.ANT.UXXX/XXX-MS
Examples of use: Automation systems, production lines, retail and logistics. Multi antenna array for smart shelves and portals.
ID ISC. MAXU.1002

ID ISC. LRU500i

MAXU1002 UHF Stand Alone Reader
-
IP53 rated aluminium enclosure (upgradable to IP64 with sealing cap) Dimensions: 260x157x65mm.
-
Power output 2W, Read ranges 8-10m.
-
Interfaces: USB and Ethernet for configuration.
-
Supported transponders – EPC Class 1 Gen2, and ISO18000-6.
-
Internally manages 8950 records
-
Administration with FREE myAXXESS Manager software
Examples of use: Barrier and Gate Automation Systems, Vehicle Identification, Parking management.
LRU500i - UHF Compact Reader with integrated antenna and signal light
Ideal solution for vehicle identification and parking access control applications in airports, universities, gated communities and others.
Special features:
-
Circular-polarized antenna for any transponder orientation
-
1 externeal antenna port for 2-lane applications
-
Up to 8 m read range for Automatic Vehicle Identification (AVI)
-
Robust and compact housing for outdoor use (IP65)
-
Integrated signal light (red/green)
-
Secure Key Storage for application keys
-
Fast and easy mounting and installation
ID MAXU.500i

MAXU.500i UHF Vehicle Access Controll Reader with integrated antenna, signal light and Access Controller
The ideal Stand alone-solution for vehicle identification and parking access control applications in airports, universities, gated communities and others.
Special features:
-
Combination of UHF Long Range Reader with integrated antenna and Access Controller
-
Management of nearly 9.000 vehicles
-
Simultaneous monitoring of up to 2 lanes with read ranges up to 8 m
-
Non-volatile event memory, buffered real time clock and Teach-in-mode
-
Anti-Passback
-
Integrated signal light (red/green)
-
Secure Key Storage (Secure Element)
-
Fast and easy mounting and installation
-
PoE and USB interface
ID ANT.U290/290

U290/290 Robust Antenna - Circular polarized antenna for UHF operating frequencies between 865-928 MHz
-
Dimensions: 288 mm x 288 mm x 65 mm
-
Antenna connection: Koax cable (H155) RG58, TNC socket
Special features:
-
Circular polarization for optimized reading performance
-
IP65 for outdoor applications
-
Robust and high-quality design
-
TNC connectors
-
VESA connection
-
Secundary safety (optional)
ID ANT.U580/290

U580/290 Robust Antenna - Circular polarized antenna for UHF operating frequencies between 865-928 MHz
-
Dimensions: 576 mm x 288 mm x 80 mm
-
Antenna connection: Koax cable (H155) RG58, TNC socket
Special features:
-
Circular polarization for optimized reading performance
-
IP65 for outdoor applications
-
Robust and high-quality design
-
TNC connectors
-
VESA connection
-
Secundary safety (optional)
-
30° beam width, particularly suitable for vehicle identification and Free Flow Tolling systems
ID ISC.LR.WS-A

The Wiegand Switch ID ISC.LR.WS-A is a smart and cost-effective solution for multilane vehicle access control installations. With just one UHF reader the Wiegand Switch allows the control of two independent lanes (e.g. entry and exit). Depending on a reading event at a specific antenna, the switch transmits the Wiegand signal to the particular input of the access control panel. The access is only allowed at the specific lane.
Special features:
-
Cost-effective Wiegand solution for 2 lanes
-
Display of the active output channel
-
Compact housing
-
Easy installation
-
DIN rail mounting
-
Supports several FEIG RFID readers
-
Automatic signal improvement in case of communication problems