Classic-Pro – 13.56 MHz Readers and Accessories

FEIG ELECTRONIC offer a wide range of HF (High Frequency) readers, antenna and accessories. All are fully compatible with major transponder manufacturers such as NXP, EM, TI and other manufacturers who conform to ISO15693* and ISO14443*. FEIG have also developed special firmware for a number of other protocols which are available on request. Most Classic-Pro readers are fully NFC (Near Field Communication) compatible. Unless otherwise stated all FEIG readers can write to transponders and well as read data.

 

The Classic-Pro range covers OEM modules such as the ID.CPR.M02, ID.CPR.40 and ID.CPR.44 units to the housed proximity readers, ID.CPR.02, ID.CPR.30, ID.CPR.40 and the ID.MAX50.

 

Classic-Pro readers can be supplied with a number of data output methods such as, Clock and Data, Wiegand, RS232, USB and Ethernet.

 

Readers can (where specified) be used with internal or external antenna.

 

Classic-Pro readers are used in a number of applications such as, ticketing, car parking, cashless vending, access control, ePayment and eDocument (ePassports).

 

*(if you are in any doubt please check the relevant data sheet or ask for advice).

 

Below is a small selection of the OBID Classic Pro product range -

 

 

CPR Reader Modules – CPR.M02, CPR40 -

13.56 MHz proximity read and write modules for integration in control units and terminals.

  • Dimensions: 55x50x14mm (LxWxH).

  • Integrated and external antenna.

  • Interfaces: USB, RS232-TTL, data/clock (Wiegand-Magnetic-Card-Emulation).

  • Power supply: 3.3 or 5V DC.

  • Supported transponders: ISO15693 and ISO14443 (Mifare™).

 

Examples of use: Access control, payment systems, automation systems

Data Sheet

CPR Module - External Antenna -

ID CPR02.10 – Housed Reader -

ID CPR30 – Desktop Reader -

ID CPR40.30 – Desktop Reader -

ID CPR74 – Module Reader -

Data Sheet

External PCB antenna available with standard 2 pin connector or U.FL connector.

  • Dimensions: 100x100x5mm (LxBxH) or 30x40x5mm.

 

 

 

13.56 MHz housed reader.

  • IP 54 rated

  • Dimensions: 84x84x22mm (LxWxH).

  • Integrated antenna.

  • Interfaces: (-AD version) RS232, data/clock (Wiegand-Magnetic-Card-Emulation). (-B Version) RS485

  • Power supply: 12-24V DC.

  • Supported transponders: ISO15693 and ISO14443 (Mifare™).

 

Examples of use: Access control, payment systems, automation systems

 

 

Data Sheet

13.56 MHz desktop reader.

  • USB powered

  • Dimensions: 144x84x18mm (LxWxH).

  • Integrated antenna.

  • Supported transponders: ISO15693 and ISO14443 (Mifare™).

 

Examples of use: Ticketing, PoS payment systems, automation systems

 

 

Data Sheet

Data Sheet

13.56 MHz desktop reader.

  • Dimensions: 144x84x18mm (LxWxH).

  • Integrated antenna.

  • Power supply: 5V via USB or external with RS232 option.

  • Supported transponders: ISO14443 (Mifare™). DESFire EV1 and Mifare™ PLUS –Supports NFC applications.

  • Optional: 2 SAM Sockets.

 

Examples of use: Ticketing, PoS payment systems, automation systems

 

 

 

13.56 MHz high power reader module for high security applications. Supports both ISO14443 and ISO15693 transponders.

  • Dimensions: 68x50x14mm (LxWxH).

  • Power supply: 5V DC ± 5%.

  • Interfaces: USB, RS232 TTL.

  • Internal and external antenna options.

  • Supported transponders: ISO14443 (Mifare™). DESFire EV1, Mifare™ PLUS and Mifare™ Ultralight C – Supports NFC applications.  ISO15693 Tag-it HF-i, NXP SLI/SLIX, I-Code ILT

  • Option: 4 SAM Sockets.

  • Can be used with the NEW CPR MUX - 4 way Multiplexter

  • ​

Examples of use: Ticketing, PoS payment systems, automation systems, vending, eMobility.

Data Sheet For CPR74        Data Sheet for CPR MUX

ID CPR46.10 – Housed Reader -

Data Sheet

13.56 MHz housed reader for installed applications where flush mounting is required.

  • Dimensions: 85x85mm Visible.

  • Power supply: 5V DC or 8-42V DC.

  • Interfaces: USB, RS232, RS232-LVTTL.

  • Internal antenna.

  • Supported transponders: ISO14443 (Mifare™). DESFire EV1, Mifare™ PLUS and Mifare™ Ultralight – Supports NFC applications. Option: 4 SAM Sockets.

 

Examples of use: Ticketing, PoS payment systems, automation systems, vending.

 

 

ID CPR50.10 – Housed Reader – Ethernet Interface -

13.56 MHz housed reader.

  • IP 54 rated

  • Dimensions: 84x84x22mm (LxWxH).

  • With integrated antenna.

  • Interfaces: Ethernet.

  • Power supply: external 12V DC or PoE up to 48V DC.

  • Supported transponders: ISO15693 and ISO14443 A/B (Mifare™). DESFire EV1, Mifare™ PLUS and Mifare™ Ultralight – Supports NFC applications

 

Examples of use: Access control, payment systems, automation systems

 

  • Option of external relay board – ID CPR.I/O-A for one relay and two digital inputs

 

Data Sheet

ID MAX50.10-xE – Housed Reader – Ethernet Interface –

Stand Alone Mode -

13.56 MHz housed reader.

  • IP 54 rated

  • Dimensions: 84x84x22mm (LxWxH).

  • With integrated antenna.

  • Interfaces: Ethernet.

  • Power supply: external 12V DC or PoE up to 48V DC.

  • Supported transponders: ISO15693 and ISO14443 A/B (Mifare™). DESFire EV1, Mifare™ PLUS and Mifare™ Ultralight – Supports NFC applications

 

Examples of use: Stand alone access control – Offline management of up to 9000 users.

 

  • Options – ID MAX50.10-RE – Inc. Internal relay –  ID MAX50.10-E requires part– ID CPR.I/O-A external relay board for one relay and two digital inputs

 

Data Sheet