Wavetrend

RX1000 Wireless Readers
The RX1000 Wireless Readers detect and decode RF transmitted signals from the Wavetrend family of tags. The reader incorporates a BNC connector to allow for attachment of an external antenna to extend the reader's range. The RX1000 type readers can be used singly, or networked together over a wireless network to form a networked reader system.



RX900 Ethernet Readers
The RX900 Ethernet Readers detect and decode RF transmitted signals from the Wavetrend family of tags. The reader incorporates a BNC connector to allow for attachment of an external antenna to extend the reader's range. The RX900 type readers can be used singly, or networked together over a TCPIP network to form a networked reader system.

RX201 RS232/485 Reader
The RX201 RS485 / RS232 Readers detect and decode RF transmitted signals from the Wavetrend family of tags. The reader incorporates a BNC connector to allow for attachment of an external antenna to extend the reader's range. The RX201 type readers can be used singly, or networked together to form a reader network. The reader connects to a PC or intelligent hardware controller via RS232, RS485 or TTL.

RX300 Serial Port Reader
The RX300 reader connects directly to an available serial port on a computer or intelligent hardware controller. The reader detects the presence of all Wavetrend compatible Active Tags within its read range and continuously streams the data to the serial port. Avaliable Baud rates: 57600 down to 9600. An OEM verison (RM300) is available for integration into suitable products such as mobile devices, PDA's and Hand Held Terminals.

PA100 Wiegand Interface
The Wiegand Interface unit converts a Wavetrend tag's ID data, as received through the RX201 type reader, into a standard Wiegand tag ID (HID format 26 and 32 bit selectable) allowing easy use of Wavetrend tags with standard access control systems. L-Series and W-Series versions are available for use with L-RX201 and W-RX201 readers respectively.

RX2100
The RX2100 Reader end cap for Psion G2 workabout - detects and decodes RF transmitted signals from the Wavetrend family of tags. The reader end cap come with either intergated antenna or incorporates a BNC connector to allow for attachment of an external antenna to extend the reader's range.


RM300
The RM300 Module. The reader detects the presence of all Wavetrend compatible Active Tags within its read range and continuously streams the data via a serial interface. Available for integration into suitable products such as mobile devices, PDA's and Hand Held Terminals.



TG100 Domino Tag
One of our smallest tags, the TG100 is ideally suited for use on non-metallic assets for general tracking or movement monitoring purposes. The tag has a polycarbonate coated external antenna. The tag can incorporate a motion sensor and has an anti-tamper facility.


TG1000 Frame Mount Tag
The TG1000 tag is suited for asset tracking and monitoring where the tag is required to be attached to tubular frames (including metal frames), such as roll cages, bicycles etc. The tag has an anti-tamper facility.


TG501 Personnel Tag
For use with all personnel monitoring applications such as dynamic mustering and health and safety compliance. The tag can incorporate a motion sensor and has an anti-tamper facility. The tag can also incorporate certain access control card chips allowing dual functionality


TG700 Key Fob Tag
For use with personnel applications where the tag can be secured to a key chain etc. The tag also includes a push button that can be used to raise an alert in the event of an emergency or allow for user initiated transmissions.


TG800 Asset Tag
The TG800 is ideal for use on all types of assets (including those made from metal) for general tracking and monitoring applications. The tag can incorporate a motion sensor and has an anti-tamper facility.


TG800IH Industrial Asset Tag
The TG800-IH tag is ideally suited for heavy duty or external asset or vehicle tracking and monitoring applications that require a rugged, waterproof tag. The tag is ideally suited for operating on metallic surfaces or on plastics containing a high metal content. The tag has an anti-tamper facility.


TG1810 Small Asset Tag ☆ NEW PRODUCT
Our smallest tag, the TG1810 is designed for use on metallic and non metallic assets for general tracking. It's small footprint allows placement on a wide range of items.


TG1800 Wrist Band Tag ☆ NEW PRODUCT
Small and light weight active wrist band tag, for use in personnel tracking, designed to work with standard medical type wrist bands.



AN100 Whip Antenna
This antenna has an omni-directional reception pattern around the vertical axis with null points being at the extreme ends of the stub. It offers more range than the AN200 Stub antenna. The antenna connects directly to the RX201 type reader and can be used both internally and externally.


AN200 Stub Antenna
This compact antenna connects directly to RX201 type readers. It has an omni-directional reception pattern around the vertical axis with null points being at the extreme ends of the stub. It is suitable for use both internally and externally.


AN300 & AN350 Patch Antenna
The Wavetrend Patch antenna allows for a more directional tag detection pattern than a standard omni-directional antenna. It connects to RX201 type readers through a 3m coax cable and BNC connector. It has been designed for optimal RF receiving performance with the Wavetrend reader range. The AN300 Patch offers linear polarised RF signal detection, while the AN350 offers circular polarised signal detection.

AN400 Outdoor Whip Antenna
The Wavetrend Outdoor wall-mount whip antenna has a 3 dBi gain making it suitable for long range tag detection applications. It is an omni-directional antenna and has been designed for optimal RF receiving performance with the Wavetrend reader range.