Readers - Low Frequency

Series 2000 Micro Reader
The Micro-reader is an intelligent module which provides the RF and Control functions to communicate with TI-RFID Transponders. It is equipped with a serial communications interface which may be directly connected to commonly used system controllers. The use of low-Q antennas eliminates the need to tune the system to resonance.

Series 2000 Reader S251B
The Series 2000 Reader S251B provides all the RF and control functions to communicate with TI*RFID LF Transponders. It includes a Dynamic Auto Tuning (DAT) function that automatically tunes a standard antenna to resonance and keeps it tuned during operation. The reader performs all the tasks necessary according to the commands from the host to send signals to and receive data from a TI RFID Transponder. It decodes the received RF signals into the transponder? identification number, checks the validity and handles the conversion to a standard serial interface protocol.

Series 2000 Remote Antenna Radio Frequency Module
Higher power output and ambient temperature range. 10 to 24 VDC supply. Capacitive tuning. This RF module contains all of the analogue functions required to communicate with the low frequency transponder. It uses capacitive tuning and is compatible with the S2000 Control Module.


Series 2000 Power Radio Frequency Module
Enables antennas to be located up to 120m from the readers. Needs Remote Tuning Board. This module has the same power output as the Power RF module but with the capability of connecting the antenna up to 120 metres away using a single twin axial cable. Ideal for situations where civil works must be minimised.

Series 2000 Antenna Tuning Module
The Remote Antenna RFM system is the interface between the TI-RFID Transponder and the Data Processing Unit. It sends an energizing signal to the transponder, modulates the RF signal to send data to the transponder, receives the identification signal and processes it for digital decoding.


Series 2000 Control Module
The Series 2000 Control Module (CTL) is the interface between a TI RFID Radio Frequency Module and a controlling host. The CTL controls the transmitting and receiving functions of the RFM according to the commands from the host to send signals to and receive data from a TI-RFid transponder. It decodes the received RF signals into the transponder? identification number, checks the validity and handles the conversion to a standard serial interface protocol.

Series 2000 Mini Radio Frequency Module
Designed for medium range applications where customers require a high level of integration but have a restricted power source. Requires very low operating current.