Texas Instruments

Series 2000 Micro Reader
The Micro-reader is an intelligent module which provides the RF and Control functions to communicate with TI-RFID Transponders. It is equipped with a serial communications interface which may be directly connected to commonly used system controllers. The use of low-Q antennas eliminates the need to tune the system to resonance.

Series 2000 Reader S251B
The Series 2000 Reader S251B provides all the RF and control functions to communicate with TI*RFID LF Transponders. It includes a Dynamic Auto Tuning (DAT) function that automatically tunes a standard antenna to resonance and keeps it tuned during operation. The reader performs all the tasks necessary according to the commands from the host to send signals to and receive data from a TI RFID Transponder. It decodes the received RF signals into the transponder? identification number, checks the validity and handles the conversion to a standard serial interface protocol.

Series 2000 Remote Antenna Radio Frequency Module
Higher power output and ambient temperature range. 10 to 24 VDC supply. Capacitive tuning. This RF module contains all of the analogue functions required to communicate with the low frequency transponder. It uses capacitive tuning and is compatible with the S2000 Control Module.


Series 2000 Power Radio Frequency Module
Enables antennas to be located up to 120m from the readers. Needs Remote Tuning Board. This module has the same power output as the Power RF module but with the capability of connecting the antenna up to 120 metres away using a single twin axial cable. Ideal for situations where civil works must be minimised.

Series 2000 Antenna Tuning Module
The Remote Antenna RFM system is the interface between the TI-RFID Transponder and the Data Processing Unit. It sends an energizing signal to the transponder, modulates the RF signal to send data to the transponder, receives the identification signal and processes it for digital decoding.


Series 2000 Control Module
The Series 2000 Control Module (CTL) is the interface between a TI RFID Radio Frequency Module and a controlling host. The CTL controls the transmitting and receiving functions of the RFM according to the commands from the host to send signals to and receive data from a TI-RFid transponder. It decodes the received RF signals into the transponder? identification number, checks the validity and handles the conversion to a standard serial interface protocol.

Series 2000 Mini Radio Frequency Module
Designed for medium range applications where customers require a high level of integration but have a restricted power source. Requires very low operating current.




Series 2000 Gate Antenna Large
The Large Series 2000 Gate Antenna is a fully-packaged antenna for applications like vehicle access to parking lots in an outdoor environment. It can be mounted on a pole or a wall. This antenna is fully packaged for use in vehicle identification systems allowing access to controlled areas. This antenna is manufatured from UV stabilised high impact polystyrol (UVSHIPS) and is sealed to IP44.

Series 2000 Gate Antenna Medium
The gate antenna is designed for use in doorways, entrances and corridors, beside conveyers, or in any location where the reading field coverage needs to be maximized. This antenna is manufactured from UVSHIPS and is sealed to IP65.

Series 2000 Gate Antenna Small
The small gate antenna is designed for use beside conveyers, or in any small defined location. This antenna is manufactured from UVSHIPS and is sealed to IP65.


Series 2000 Stick Antenna
The ferrite rod antenna is a short cylindrical device used in stationary applications where space is limited. An additional benefit of the stick antenna is that it allows a precise discrimination between RFID tags in close proximity to one another through a highly directed field. Sealed to IP66.

Series 2000 Stick Antenna for Series 2000 Mini RFM
This stick antenna is specially designed for use with the Mini-RFM. The ferrite rod antenna is a short cylindrical device used in stationary applications where space is limited. An additional benefit of the stick antenna is that it allows a precise discrimination between RFID tags in close proximity to one another through a highly directed field. Sealed to IP65.


12mm Wedge Transponder
The wedge transponder is encapsulated within a plastic mould compound. It has a compact and robust construction with a built-in notch for precise fixturing in secondary packages. The wedge shape enables automatic orientation. The Read Only functionality means the transponder cannot be reprogrammed and has a factory programmed unique 64-bit number. Also available in read/write.

12mm Wedge DST
This wdge transponder has all the physical features of the R/O and R/W but with the added benefit of high security encrypted controls.


12mm Wedge DST+
This new generation of secure RFID transponder provides additional levels of security. In addition to the proven TI encryption known from the DST transponder, mutual authentication increases security and sophisticated diagnostic features allow fraud prevention and after-theft diagnosis. It offers 50 bytes of EEPROM memory from which 26 bytes are free for user data. The DST+ can be operated in DST mode in which it is functional compatible to the DST.

Multi Usage Transponder (12mm Plastic Wedge)
This multi usage transponder provides a combination of features that allow it to use as a read-only (R/O), read-write (R/W), and multipage transponder. In addition, it features low Q operation allowing close proximity to metal whilst keeping the well-known TI reading distance performance superior to comparable products.

23mm Disc Transponder Inlay
This inlay has been developed for applications where users require bespoke transponder packaging e.g. a plastic housing filled with encapsulating compound.


23mm Glass Transponder
General purpose glass transponders work reliably under extreme environmental conditions, for instance in liquids. The small size offers a high mechanical robustness. They have a good read range and are 100% waterproof. Secondary packages such as key fobs, plastic housings for mounting on metal, etc. are available. Available in read only, read/write and ECO options.

32mm Glass Transponder
General purpose glass transponders work reliably under extreme environmental conditions, for instance in liquids. The small size offers a high mechanical robustness. They have a good read range and are 100% waterproof. Secondary packages such as key fobs, plastic housings for mounting on metal, etc. are available. Available in read only, read/write and ECO options.

32mm Glass Transponder Eco Line
General purpose glass transponders work reliably under extreme environmental conditions, for instance in liquids. The small size offers a high mechanical robustness. They have a good read range and are 100% waterproof. Secondary packages such as key fobs, plastic housings for mounting on metal, etc. are available. Available in read only, read/write and ECO options.

Keyring Tag
The TI-RFid keyring tag provides the secure and convenient link for effortless purchasing, for vehicle anti-theft systems, and access control. Inside the plastic shielding is a TI-RFid 23 mm transponder which has been packaged to withstand rough handling associated with key ring use. In read only and read/write formats.

Keyring Tag DST
The TI-RFid keyring tag provides the secure and convenient link for effortless purchasing, for vehicle anti-theft systems, and access control. Inside the plastic shielding is a TI-RFid 23 mm transponder which has been packaged to withstand rough handling associated with key ring use. In read only and read/write formats.

30mm Disk Transponder
The disk transponder offers flexible mounting options; with resistance to high temperature and shock for many industrial applications such as waste bin identification, work and asset tracking. The Read/Write functionality means the transponder can be reprogrammed with upto 64-bit of information. Available in read, read/write options.

Card Transponder
A blank white card transponder that meets the requirements for ticketing, personnel and vehicle access, asset management and so on. Available in read only and read/write options.


85mm Disk Transponder
This slim disk transponder fits perfectly on a car windshield for parking security applications. The long read range enables this transponder for multiple uses in warehouse applications. Read only and read/write data functionality with 64bit ID.

Mount-on-Metal Transponder
Mount on Metal transponders for logistics and waste management applications - Read only and read/write data functionality with 64bit ID.


120mm Cylindrical Transponder
This durable tag features enhanced read range. Specially packaged to withstand harsh environments to allow it to be attached by means of non-metallic posts to trucks and containers. Available in read only and read/write options.


Series 2000 RF ASIC (Original)
Used for automotive immobiliser readers and high volume handheld units. Use in conjunction with a 17.1776MHz crystal.


Series 2000 RF ASIC (New)
Used for automotive immobiliser readers and high volume handheld units. Use in conjunction with a 4MHz resonator.



3D AFE
3D analog front end for automotive passive entry and other applications. Designed for use in conjunction with a supplementary transmitter and battery to provide the functions required for a long range active transponder with passive low frequency back-up.